 "NASA stopwatch can measure fraction of a billionth of second accurately")
NASA scientists have developed a stopwatch timer that can measure within a fraction of a billionth of a second, an advance that can help record precise height measurements of sea ice, glaciers, forests and the rest of the Earth's surfaces.
Engineers at NASA's Goddard Space Flight Centre in the US built the timer for the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) scheduled to launch in 2018, which will use six green laser beams to measure height.
With its incredibly precise time measurements, scientists can calculate the distance between the satellite and Earth below, and from there record precise height measurements the planet's surfaces.
If its stopwatch kept time even to a highly accurate millionth of a second, ICESat-2 could only measure elevation to within about 500 feet. Scientists would not be able to tell the top of a five-story building from the bottom.
That does not cut it when the goal is to record even subtle changes as ice sheets melt or sea ice thins.
To reach the needed precision of a fraction of a billionth of a second, engineers had to to develop and build their own series of clocks on the satellite's instrument - the Advanced Topographic Laser Altimeter System, or ATLAS.
This timing accuracy will allow researchers to measure heights to within about two inches.
"Calculating the elevation of the ice is all about time of flight," said Phil Luers, deputy instrument system engineer with the ATLAS instrument.
ATLAS pulses beams of laser light to the ground and then records how long it takes each photon to return.
This time, when combined with the speed of light, tells researchers how far the laser light travelled. This flight distance, combined with the knowledge of exactly where the satellite is in space, tells researchers the height of Earth's surface below.
The timing clock itself consists of several parts to better keep track of time.
There is the GPS receiver, which ticks off every second - a coarse clock that tells time for the satellite.
Engineers at NASA's Goddard Space Flight Centre in the US built the timer for the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) scheduled to launch in 2018, which will use six green laser beams to measure height.
With its incredibly precise time measurements, scientists can calculate the distance between the satellite and Earth below, and from there record precise height measurements the planet's surfaces.
More From This Section
"Light moves really, really fast, and if you're going to use it to measure something to a couple of centimetres, you'd better have a really, really good clock," said Tom Neumann, ICESat-2's deputy project scientist.
If its stopwatch kept time even to a highly accurate millionth of a second, ICESat-2 could only measure elevation to within about 500 feet. Scientists would not be able to tell the top of a five-story building from the bottom.
That does not cut it when the goal is to record even subtle changes as ice sheets melt or sea ice thins.
To reach the needed precision of a fraction of a billionth of a second, engineers had to to develop and build their own series of clocks on the satellite's instrument - the Advanced Topographic Laser Altimeter System, or ATLAS.
This timing accuracy will allow researchers to measure heights to within about two inches.
"Calculating the elevation of the ice is all about time of flight," said Phil Luers, deputy instrument system engineer with the ATLAS instrument.
ATLAS pulses beams of laser light to the ground and then records how long it takes each photon to return.
This time, when combined with the speed of light, tells researchers how far the laser light travelled. This flight distance, combined with the knowledge of exactly where the satellite is in space, tells researchers the height of Earth's surface below.
The timing clock itself consists of several parts to better keep track of time.
There is the GPS receiver, which ticks off every second - a coarse clock that tells time for the satellite.