Responding to shareholder queries on future plans, he said most of the expansion to reach the capacity would be organic
NINL, a 1.1-million tonne steel manufacturing unit in Odisha, has reached 100 per cent capacity utilisation within one year of its acquisition by Tata Steel. On July 4 2022, the steel major completed the acquisition of Neelachal Ispat Nigam Ltd (NINL) through subsidiary company Tata Steel Long Products Ltd (TSLPL) for a consideration of Rs 12,000 crore. After being shut for almost three years, operations at the NINL unit was started by Tata Steel in October 2023. "NINL has successfully ramped up production to its rated capacity of 1 million tonnes on an annualised basis within just nine months of its acquisition," Ashish Anupam, MD of Tata Steel Long Products Limited (TSLPL), told PTI in reply to a query on the progress in one year of acquisition. The acquisition was efficiently implemented even though the NINL plant had been mothballed for nearly three years. In August 2023, the company will complete the commissioning of its last major facility, a coke oven unit at NINL, he ...
DPIIT asked to nudge ministries to hold talks with beneficiaries
India's second-largest steel producer is seeking to trim emissions from the current 2.5 tons of carbon dioxide for every ton of the alloy produced to 1.8 tons in 2030
Last year, the list was topped by Microsoft, followed by Mercedes-Benz and Amazon
Stock valuations could improve dramatically if demand rebounds and the China policy support comes through
Stocks to watch on June 19, 2023: From Tata Steel to NMDC, here are the top stocks to watch in Monday's trading session
Industry giant Tata Steel is planning a consolidated capital expenditure (capex) of Rs 16,000 crore for its domestic and global operations during the current financial year, according to its top management. Of the planned amount, Tata Steel has earmarked Rs 10,000 crore towards standalone operations and Rs 2,000 crore for its subsidiaries in India, the company's CEO & MD T V Narendran and Executive Director & CFO Koushik Chatterjee said. "The projected capital expenditure (capex) for FY2023-24 is set at Rs 16,000 crore on a consolidated basis which is intended to be financed through internal accruals over the full year," the executives said in the company's annual report for 2022-23. Of this, Rs 10,000 crore has been earmarked towards Tata Steel Standalone operations of which the Kalinganagar project will account for approximately 70 per cent, they said. The company is in process of expanding capacity of its plant at Kalinganagar, in Odisha to 8 MT from 3 MT. "Our other Indian
Tata Steel has partnered with Germany's SMS group to explore development of low carbon steel making process. As part of the MoU, both companies shall undertake further technical discussions and initiate actions for conducting Joint Industrial Demonstration of the EASyMelt technology developed by SMS group, Tata Steel said in a statement. "The demonstration will be executed at E Blast Furnace in Tata Steel's Jamshedpur plant with an objective to reduce CO2 emission by more than 50 per cent from blast furnace's baseline operation," it said. The EASyMelt (electric-assisted syngas smelter) technology is an iron-making solution that can be implemented in existing integrated steel plants to accelerate decarbonisation. T V Narendran, CEO & MD, Tata Steel, said "We actively look for solutions to facilitate the transition to green steel production, and thus contribute to a sustainable future. Further, India being the second largest steel producer in the world also places a huge ...
The objective of the demonstration will be to reduce carbon dioxide emissions by more than 50% from the blast furnace's baseline operation, it added
Two persons injured in an accidental steam leak at Tata Steel's Meramandali plant in Odisha's Dhenkanal district remain in intensive care while 16 others remain hospitalised, a company statement said. The steam leak occurred at around 1 PM on Tuesday during inspection work at the plant and affected workers and engineers. "Of the 18 burn cases admitted to a private hospital in Cuttack, two remain in intensive care... The other injured persons are in stable condition, receiving continuous, high-quality care. "Another person initially admitted for a panic attack at the incident site, is now in good health and expected to be discharged shortly," Tata Steel said in a statement. Dhenkanal SP Gyanaranjan Mohapatra on Tuesday said that around 19 persons were injured in the incident. The injured persons were immediately shifted to the Occupational Health Centre inside the plant premises and then to Cuttack for further treatment.
One person critical; injury victims shifted to Cuttack city: company statement
Few workers at Tata Steel Ltd's plant in Odisha's Dhenkanal were "affected", the company said in a statement on Tuesday. "We are saddened to report an accident at the BFPP2 power plant due to escape of steam at Tata Steel Meramandali Works in Dhenkanal, Odisha," Tata Steel said in the statement. "The accident took place at 1pm during inspection work. The workers were shifted to the occupational health centre inside the plant premises and then to Cuttack for further treatment," the statement said. As a precautionary measure, they were rushed in the company's ambulance, accompanied by doctor and paramedics, it added.
Except Jindal Stainless, other metal stocks require to cross key barrier to rally forward
Stocks to watch today, June 9, 2023: Tata Power Renewable Energy, through its subsidiary, has received a contract to set up a 966 MW round-the-clock hybrid renewable power projects for Tata Steel
We believe that renewable energy is the future, said T. V. Narendran, CEO & MD, Tata Steel
Tata Steel Mining Limited (TSML) on Tuesday signed a Memorandum of Understanding (MoU) with French Cleantech company METRON, to design and implement an advanced energy management and optimisation platform for the company's Ferro Alloys Plant located at Athagarh in Odisha's Cuttack district. METRON is a leading provider of cloud-based energy management solutions. According to the MoU, the software solution developed by METRON will enable Tata Steel Mining monitor, analyse, and optimise energy consumption in real time and reduce carbon footprint across plant utilities. A company release said that it will help digitalise energy to decarbonise territories, optimise energy consumption, reduce costs, and improve overall operational efficiency. The cloud-based energy management and optimisation platform will provide real-time visibility of energy usage across the plant, allowing Tata Steel Mining to identify areas for improvement and make data-driven decisions to optimise energy ...
INOX Air Products will invest Rs 1,300 crore to set up two air separation units having capacity of 1,800 tonnes a day each at Tata Steel's plant in Dhenkanal, Odisha, company's Managing Director Siddharth Jain said. The plant is being set up as part of a partnership with the steel major for supplying industrial gases like oxygen, nitrogen and argon -- which are used in the steel making process, the company executive told PTI during an interaction. The air separation units (ASUs) will be the single-largest greenfield investment ever made by INOX Air Products and will support Tata Steel's ongoing steel capacity expansion. The units will separate these gases from the air and supply it to the steel plant, Jain said, adding that the project is expected to be commissioned by March, 2025. When asked about the details of the partnership, he said his company has signed an agreement with Tata Steel for 20 years to supply oxygen, nitrogen and argon, and Rs 1,300 crore will be invested to set
Transition calls for large investment but demand for and premium on eco-friendly steel remains dull
Tata Steel sees enough growth opportunities within its existing facilities to actualise an expansion plan to achieve 40 million tonne capacity in India by 2030, almost double of its current capability in the country, CEO and Managing Director T V Narendran said. The steel giant will continue to hold talks with the UK government over a financial package for operations there, he said. The company has planned capital expenditure to the tune of Rs 12,000 crore for India operations, he said. "In India, basically we want to increase the capacity. We have already around 21 MT. It will be 25 MT soon because the Kalinganagar expansion is going on. We have a few more plans - Neelachal, Kalinganagar and Meramandali or Angul to achieve 40 million tonne capacity by 2030," Narendran told PTI in an interview here. There are multiple ongoing projects at various locations in India and the company has prioritised completion of the 5 MTPA Kalinganagar expansion", he said. The company is in the proce